Contact Us!

sales@MTMnet.com

Call: 800-884-6945

extreme_banner1.gif (16321 bytes)
 

cardlogos.gif (3354 bytes)

SECURE ONLINE SHOPPING

Or Fax Purchase Order to 402-345-9945

PRODUCTS

SUPPORT

DOWNLOADS

HOME NETWORKS

MESSAGE BOARD

TECHNICAL DOCS

NEWSLETTER

VISIO ICONS

FEEDBACK

COMPANY INFO.

HOME PAGE

USED 3COM

USED CISCO

USED EXTREME

USED NORTEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

browseproducts.jpg (18707 bytes)

extreme_logo.gif (1445 bytes)

Model #: 15010
List Price: $ 5,995.00
Your Price: $ 3,495.00
Availability: Inquire

ExtremeSummit48.gif (4081 bytes)

New Extreme Summit 48
Layer 3 Switch
Extreme 15010

Click here for Refurbished Summit 48

QTY:

view_cart.gif (1507 bytes)

tab_overview.gif (2066 bytes)

Overview:
Extreme Networks 15010 Summit 48, 48 10/100BASE-TX ports, 4 unpopulated GBIC based 1000BASE-X port (2 active and 2 redundant) with Basic Layer 3 switching software .

With 48 switched 10/100 Mbps auto-negotiating Ethernet ports and two full-duplex GBIC-based 1000BASE-SX, LX or LX-70 Gigabit Ethernet ports, Summit48 has a 17.5 Gbps non-blocking switch fabric and a forwarding rate of 10.1 million packets per second. Summit 48 comes with wire-speed Layer 2 and wire-speed basic Layer 3 switching using static routing or RIP V1/V2 routing protocols. For easy scalability, the Summit 48 upgrades to full Layer 3 switching with a simple upgrade key. The full Layer 3 switching includes support for protocols such as OSPF, DVMRP, PIM and IPX routing of multiple encapsulation types.

Pre-installed on every Extreme Networks switch, the ExtremeWare™ software suite combines industry-standard protocols to ensure interoperability with legacy switches and routers, plus Policy-Based Quality of Service (QoS) for bandwidth management and traffic.

  • Gigabit Ethernet links to the network core and high-density 10/100 Mbps ports to the edge
  • Non-blocking switch fabric bandwidth with wire-speed switch performance
  • Start with basic Layer 3 switching and wire-speed Layer 2 switching
  • Scale up to full Layer 3- using advanced IP Routing Protocols and IPX Routing- with a simple upgrade key
  • Policy-Based QoS, including bandwidth management, prioritization and congestion control
  • Fault-tolerant: multiple load-sharing trunks, multiple spanning trees and optional redundant power supply
  • Extensive management through HTTP, SNMP, RMON and command line interface

Specifications:

Summit48:
48 10/100BASE-TX ports
Two GBIC-based 1000BASE-SX ports (hot swappable via SX or LX GBIC modules) each with a redundant GBIC port (unpopulated)
True QoS via ExtremeWare and Policy-Based Quality of Service
Full or half duplex operation
Multiple spanning tree support
Multiple load-sharing trunks
Up to 128,000 Layer 2 addresses
Up to 64,000 Layer 3 addresses
4 MB buffering

Protocols and Standards
IEEE 802.3z 1000BASE-X
IEEE 802.3ab 1000BASE-T
IEEE 802.3x Flow control
IEEE 802.3ad Link aggregation
IEEE 802.1D-1998 (includes 802.1p)
IEEE 802.1Q VLAN Tagging
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 826 ARP
RFC 854 Telnet
RFC 1058 RIP
RFC 1122 Host Requirements
RFC 1256 Router Discover Protocol
RFC 1519 CIDR
RFC 1542 BootP
RFC 1723 RIP v2
RFC 1812 IP Router Requirement
RFC 2068 HTTP
RFC 2178 OSPF
RFC 2131 BootP/DHCP Relay
RFC 2236
DVMRP v3
RSVP
PIM

Performance
Summit 48: 17.5 Gbps non-blocking bandwidth Route/filter/forward 10.1 million pps

Management and Security
RFC 1157 SNMP v1/v2c
RFC 1213 MIB II
RFC 1354 IP forwarding table MIB
RFC 1850 OSPF 2 MIB
RFC 1493 Bridge MIB
RFC 2037 Entity MIB
RFC 1573 Evolution of Interface
RFC 1643 Ethernet MIB
RFC 1757 Four groups of RMON
RFC 2021 RMON probe configuration
RFC 2239 802.3 MAU MIB
RFC 1724 RIP v2 MIB
RFC 2138 RADIUS
ExtremeWare Enterprise MIB
HTML and telnet management

Physical and Environmental
Dimensions: (H) 3.5 in x (W) 17.32 in x (D) 17.42 in (H) 8.90 cm x (W) 44.0 cm x (D) 44.25 cm
Weight: Summit48: 18 lb (8.17 kg) Summit24: 17 lb (7.65 kg)
Operating Temperature: 0° C to 40° C
Storage Temperature: -10° C to 70° C
Humidity: 10% to 95% non-condensing
Power: 90-250 VAC, 47-63 Hz, 2.5 A max
Includes hardware for mounting in a standard 19-inch rack

Regulatory Compliance
EN55022 Class A
FCC part 15 Class A
CSA C108.8-M1983 (A)
VCCI Class 2
EN50082-1
EN60068
UL 1950 3rd Edition,
cUL listed to CSA 22.2#950
EN60950: 1992/A3: 1995
TUV GS Mark
CE Mark

Benefits:
The high-density 10/100 Mbps auto-negotiating Ethernet ports in these switches simplify deployment and minimize complexity. There's no need to change any existing subnet infrastructures. Both the Summit 48 and the Summit 24 come equipped with wire-speed Layer 2 switching and wire-speed basic Layer 3 switching that supports static routing and the use of the RIP protocol. Using a system-specific upgrade key, network managers can migrate anytime to full Layer 3 switching including support for protocols such as OSPF, PIM and IPX routing of multiple encapsulation types.

The ExtremeWare standards-based software suite also simplifies
switch management. Preloaded on every Summit switch, ExtremeWare includes a comprehensive command line interface (CLI) and the easy-to-use ExtremeWare Vista™ Web-based management interface. ExtremeWare also supports SNMP and four groups of RMON.

- Thank you for viewing our Extreme 15010 Summit 48 Switch Page -


Contact Us!

sales@MTMnet.com

Call: 800-884-6945