Contact Us!

sales@MTMnet.com

Call: 877-868-6638

 

cardlogos.gif (3354 bytes)

SECURE ONLINE SHOPPING

Or Fax Purchase Order to 760-804-1439

PRODUCTS

SUPPORT

DOWNLOADS

MESSAGE BOARD

HOME NETWORKS

TECHNICAL DOCS

FLASH INTRO.

VISIO ICONS

FEEDBACK

COMPANY INFO.

HOME PAGE

USED 3COM

USED CISCO

USED EXTREME

USED NORTEL

 

 

 

 

 

 

 

 

 

browseproducts.jpg (18707 bytes)

cisco_logo_tagline.gif (1231 bytes)

Model #: WIC-2T
List Price: $ 700.00
Your Price: $ 250.00
Availability: 2 In Stock
Condition: Refurbished

Cisc WIC-2T Dual Port Serial Module

Cisco Dual Serial Port WAN Interface Card
WIC-2T

Your Source for Cisco
WIC-2T Modules!

QTY:

view_cart.gif (1507 bytes)

tab_overview.gif (2066 bytes)

Overview:
The WIC-2T dual serial port Cisco module provides higher levels of serial port density for a single WAN interface card and are supported on the Cisco 2600 The module supports speeds of up to a maximum port speed of 2.048 Mbps. The low serial speed WIC-2A/S supports up to 128Kbps synchronous or 115.2 Kbps asynchronous serial links. Each port can be configured independent of the other allowing support for different physical interfaces (protocol and DTE/DCE). Both cards support mixed asynchronous and synchronous operation on a single card as well.

These dual-serial port WAN interface cards feature Cisco`s new, compact, Smart Serial connectors to support a wide variety of electrical interfaces when used with the appropriate transition cable. This includes: V.35, RS-232, RS-449, RS-530, RS-530A in male and female versions for both DCE and DTE devices. This feature provides easy configuration and re-configuration as network requirements change without the need of purchasing a different serial interface card.

Two cables are required to support the two ports on the WIC.

Specifications:

Features:

  • Asynchronous support with a maximum speed (per port) of 115.2 Kbps, minimum 600 bps. If you need to run at speeds lower than 600 bps, use the AUX port instead.
  • Synchronous support with a maximum speed of 2.048 Mbps per port.
    • Supports one port at 8 Mbps when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.
    • Supports two ports at 4 Mbps each when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.

- Thank you for visiting our WIC-2T Cisco Module Page - 

 

Contact Us!

sales@MTMnet.com

Call: 877-868-6638

3Com_CB_NB_PB.jpg (10165 bytes)